|
One
Way Monitoring and Control Solutions
HS-900 Series
The HS-900
series of HopLink Cordless Wires™ seamlessly bridge the costly communications
gap between sensors, switches, alarms and PLC's. The frequency hopping spread
spectrum (FHSS) HS-900 is a license-free, cost-effective alternative to cable
and conduit; it's quick to install, easy to maintain and much more versatile.
Effectively relay signals over great distances and through high interference
with these HopLink radios.
 |
Typical
applications include oil & gas, water/wastewater, process
control,
tank level, sensor monitoring, pump control, etc. |
| Signals |
 |
| Packaging
and Approvals |
| Transmitters |
Receiver |
 |
Weatherproof
NEMA 4X conduit -mount |
| Class I
Div 2 (Groups A,B,C,D), CSA, NRTL |
| FCC
(US), ISC (Can) |
|
 |
DIN
rail mount |
| Class I
Div 2 (Groups A,B,C,D), CSA, UL |
| FCC
(US), ISC (Can) |
|
 |
DIN
rail mount |
| Class I
Div 2 (Groups A,B,C,D), CSA, UL |
| FCC
(US), ISC (Can) |
|
|
HS-900-AC
- p/n ASYS-1920-07
HS-900-DC - p/n ASYS-1920-08
 |
|
-
AC Transmitter |
-
DC Transmitter |
-
Receiver |
|
|
Input |
One
(1) 4-20mA analog
(250 ohm impedance)
Two (2) discrete (85 to 240VDC) |
One
(1) 4-20mA analog
(250 ohm impedance)
Two (2) discrete (85 to 240VDC) |
N/A |
|
Outputs |
N/A |
N/A |
One
(1) 4-20mA analog (12-bit resolution (maximum loop impedance is 150 to
1,050 ohms for power supply voltages of 12 to 30VDC))* and three (3) dry
contacts offering NO and NC terminals rated at 120VAC, 0.5A (one (1) dry
contact is for the RF link status and the other two (2) reflect the
status of the discrete inputs) |
|
Wiring
Connections |
18"
(457mm) pigtail
(color coded) |
18"
(457mm) pigtail
(color coded) |
12-24
AWG screw type terminals, terminal blocks are removable |
|
Power |
100
to 240VAC, 50 to 60Hz, 10VA |
9
to 30VDC |
9
to 30VDC |
|
Power
Consumption |
13
Watts |
1.8
Watts (average)/8.4 Watts (peak) |
2
Watts |
|
Dimensions |
11"
x 2.3" (279mm x 57mm) diameter, including Omni antenna |
11"
x 2.3" (279mm x 57mm) diameter, including Omni antenna |
4"
x 4.5" x 0.7" (102mm x 114mm x 18mm) |
|
LED
Indicators |
One
(1) Green [ON when functional] |
One
(1) Green [ON when functional] |
Three
(3) Green; one (1) for RF link status and the other two (2) for discrete
output status |
| Frequency |
902
to 928MHz - ISM band |
902
to 928MHz - ISM band |
902
to 928MHz - ISM band |
|
Transmit
Power |
1
Watt (30dBm) |
1
Watt (30dBm) |
N/A |
|
Range |
600
to 1000 feet (180 to 305m) in-plant [obstructed]; 4 to 5 miles (6 to
8km) line-of-sight with Omni antenna; 20+ miles (32km) line-of-sight
with Yagi antenna |
600
to 1000 feet (180 to 305m) in-plant [obstructed]; 4 to 5 miles (6 to
8km) line-of-sight with Omni antenna; 20+ miles (32km) line-of-sight
with Yagi antenna |
600
to 1000 feet (180 to 305m) in-plant [obstructed]; 4 to 5 miles (6 to
8km) line-of-sight with Omni antenna; 20+ miles (32km) line-of-sight
with Yagi antenna |
|
Environmental
Rating |
NEMA
4X (equivalent to IP65) |
NEMA
4X (equivalent to IP65) |
NEMA
1 (equivalent to IP30) |
|
Approvals |
USA
- FCC Part 15.247
Canada - ISC RSS 210 |
USA
- FCC Part 15.247
Canada - ISC RSS 210 |
USA
- FCC Part 15.247
Canada - ISC RSS 210 |
|
Certifications |
CSA/C
& US, UL - Class I,
Div 2 (Groups A,B,C,D)
|
CSA/C
& US, UL - Class I,
Div 2 (Groups A,B,C,D)
|
CSA/C
& US, UL - Class I,
Div 2 (Groups A,B,C,D)
|
*MAX.
Loop Impedance = (Supply Voltage - 7) x 50
Specifications subject to change without notice |
**Peak
power consumption only occurs during transmission spikes |
Wiring
Diagrams
Example:
HS-900-AC Transmitter (2-wire)
|
Oratech Controls, Inc.
