Antennas

Adapter and connectors

Antenna cables

Lightning Arrester

Power Supply

DIN Rail Mount 24VDC Power Supply [P0008]

120 to 230VAC primary power, 50 to 60Hz, converts to 24VDC regulated @ 650mA - suitable for powering only one OMNEX transmitter or multiple receivers.

For more Information contact Oratech Controls, Inc.

Antenna Options

1/4 Wave Omni Antenna & 6" cable [ASSY-1214-01]

0dB gain whip antenna for REX-900 - c/w 3" 1/4 wave whip antenna, L mounting bracket and 6' (2m) of RG-174 cable.

For more Information contact Oratech Controls, Inc.

1/4 Wave Omni Antenna & 6' cable [ASSY-1214-02]

0dB gain antenna for TEX-900, DX-900 & HS-900 RX - c/w 3" 1/4 wave whip antenna, L mounting bracket and 6' (2m) of RG174 cable.

For more Information contact Oratech Controls, Inc.

1/4 Wave Omni Antenna & 10' cable [A0005]

0db gain antenna with 10' (3m) of RG-58 cable, terminating with a BNC(M) connection. Includes L mount bracket. Requires adapter cable to connect to radio.
Note: Due to cable losses, should only be used for HS-900 & DX-900MA distances <3 miles (4.8km) LOS, and TEX/REX-900 distances <0.5 miles (0.8km) LOS.

For more Information contact Oratech Controls, Inc.

1/4 Wave Omni Antenna & 25' cable [A0021]

0db gain antenna with 25' (7.6m) of RG-58 cable, terminating with a BNC(M) connection. Includes L mount bracket. Requires adapter cable to connect to radio.
Note: Due to cable losses, should only be used for HS-900 & DX-900MA distances <1 mile (1.6km) LOS, and TEX/REX-900 distances <100 feet (304m).

For more Information contact Oratech Controls, Inc.

5dB Omni Base Station Antenna [A0017]

24" (61cm) mast with propeller type base with Type N(F) connection. Includes "L" mount bracket.
For more Information contact Oratech Controls, Inc.

6dB Yagi Antenna [A0012]

3 element yagi with Type N(F) connector. 7 1/4"W X 17 1/2"L. Will require cable and adapter - see the following sections.
For more Information contact Oratech Controls, Inc.

10dB Yagi Antenna [A0011]

7 element yagi with Type N(F) connector. Will require cable and adapter - see the following sections.
For more Information contact Oratech Controls, Inc.

4-Way Antenna Splitter [ASSY-2298-01]

The 4-Way Antenna Splitter allows 4 OMNEX HopLink receivers to share a single antenna. Designed for use with HS-900 receivers, REX-900 receivers and DS-900 radios programmed to receive only, these splitters can also be cascaded together to connect a maximum of 64 receivers to one antenna (for best performance when cascading, the signal should not pass through more than 3 splitters before reaching a receiver).

This DIN rail mount product, with MCX(F) connectors for the antenna and receivers, will perform amplification and impedance-matching functions, and operates across a broad power supply and temperature range.

Pigtail Adapters & Connectors

Type MCX(M) to BNC(F) adapter [ACAB-1410-03]

2' (60cm) pigtail adapter with RG-174 cable, MCX(M) to BNC(F), used with HS-900, TEX-900, DS-900, DX-900MA or
DM-900.

For more Information contact Oratech Controls, Inc.

Type MCX(M) to N(M) adapter [ACAB-1905-01]

4' (1.2m) adapter with RG316 type cable. Terminations are MCX(M) to Type N(M), used for connecting an HS-900-R, TEX-900, DS-900, DX-900MA or DM-900 to a surge suppressor/lightning arrestor.

For more Information contact Oratech Controls, Inc.

Type SMA(M) to BNC(F) adapter [ACAB-1410-06]

2' (60cm) pigtail adapter with RG-174 cable, SMA(M) to BNC(F), used with an HS-900-T.

For more Information contact Oratech Controls, Inc.

Type SMA(M) to N(M) adapter [ACAB-1905-02]

4' (1.2m) adapter with RG-316 type cable. Terminations are SMA(M) to Type N(M), used for connecting an HS-900-T to a surge suppressor/lightning arrestor.

For more Information contact Oratech Controls, Inc.

Type SMB(F) to BNC(F) adapter [ACAB-1410-04]

2' (60cm) pigtail adapter with RG-174 cable, SMB(F) to BNC(F), used with REX-900.

For more Information contact Oratech Controls, Inc.

Type SMB(F) to N(M) adapter [ACAB-1905-03]

4' (1.2m) adapter with RG-316 type cable. Terminations are SMB(F) to Type N(M), used for connecting a REX-900 to a surge suppressor/lightning arrestor.

For more Information contact Oratech Controls, Inc.

Type MCX(M) to SMB(F) adapter [ACAB-1410-07]

2' (60cm) pigtail adapter with RG-174 cable, MCX(M) to SMB(F) connections, used with the 4-way Antenna Splitter and up to 4 HS-900-R's.

For more Information contact Oratech Controls, Inc.

Type SMB(F) to SMB(F) adapter [ACAB-1410-08]

2' (60cm) pigtail cable with RG-174 cable, SMB(F) to SMB(F) connections, used with the 4-way Antenna Splitter and up to 4 REX-900's.

For more Information contact Oratech Controls, Inc.

Type SMB(F) to BNC(M) adapter [ACAB-1410-02]

2' (60cm) adapter cable with RG174 cable, SMB(F) to BNC(M) connections, used to cascade several 4-way Antenna Splitters.

For more Information contact Oratech Controls, Inc.

Type N(F) to BNC(M) adapter [J0004]

Connector adapter to get from the BNC(F) on the 2' (60cm) pigtail to the Type N(M) on the larger cables. Connections on the adapter are BNC(M) and N(F). 1' (2.5cm) length.

For more Information contact Oratech Controls, Inc.

Antenna Cable Options

RG-58 Cable [ACAB-1411-04]

Recommended for cable distances of less than 20' (6m). Cable loss is 16dB/100' (16db/30.5m). BNC(M) one end, and Type N(M) at the other.

For more Information contact Oratech Controls, Inc.

RG-213 Cable [ACAB-1412-01]

Recommended for cable distances of 20' (6m) to 50' (15m). Cable loss is 7.6dB/100' (7.6dB/30.5m). Type N(M) connectors on each end.

For more Information contact Oratech Controls, Inc.

LMR400 Cable [ACAB-1901-01]

Recommended for cable distances greater than 50' (15m) or where low cable loss is required. Cable loss is 3.9dB/100' (3.9dB/30.5m). Type N(M) connectors on each end.

For more Information contact Oratech Controls, Inc.

Lightning Arrester [A0025]

Fully weatherized, maintenance free, compact lightning arrester with multi-strike capability for the protection of any HopLink radio system.

For more Information contact Oratech Controls, Inc.