The battery-powered ultrasonic flow meter FLUXUS® F601 is an ideal tool for service work and quick control measurements. Its clamp-on flow transducers are simply mounted onto the pipe from the outside and are quickly installed, without process interruption.

The measurement is pressure independent and can take place on pipes of almost any materials and on almost any liquid. Transducers are available for pipe diameters from 1/4 Inch to 20 Feet and for temperatures ranging from -40°F to 750°F. Two pairs of transducers usually are enough for standard applications. FLUXUS F601 is highly flexible and can be used on the most various applications on totally different measuring points.

With FLUXUS® F601, flow control is a matter of a few minutes. To start the measurement, you only have to mount the transducers on the pipe, enter the pipe and medium parameters and adjust the distance between the transducers as indicated by the electronic unit. Unlike other Transit Time Meters, No zeroing procedure is necessary since all transducer pairs are factory calibrated and the calibration data is permanently stored in the transducers themselves. The user interface is always automatically adapted to the connected transducers via Plug-n-Play technology.

FLUXUS® F601 has been engineered for the harsh conditions of industrial installations. Its housing is water and dust tight and resistant against oil, many liquids and dirt. The meter and its many accessories are housed in a sturdy waterproof carrying case.

Advanced battery management and Lithium ions battery in the F601 allows for more than 14 hours of battery-powered measurement.

FLUXUS® ADM 7407 is an ultrasonic flow meter for permanent installation. Its clamp-on flow transducers are simply mounted onto the pipe from the outside and are quickly installed, without process interruption and without production stop.

Since the flow meters' transducers are not in contact with the medium to be measured, they are not submitted to wear and tear. The measurement is pressure independent and can take place on pipes of almost any materials and on almost any liquid. The flow meter is ideal for harsh chemicals.

Thanks to its exceptional dual-microprocessor technology, high number of measuring cycles per second and adaptive signal processing, FLUXUS® ADM 7407 produces stable and reliable measuring results even under difficult conditions.

No zeroing procedure is necessary at the commissioning since all transducer pairs are factory calibrated and the calibration data is permanently stored in the transducers themselves.

An extended status display helps the user to judge the measuring situation and current measuring precision directly during the measurement.

FLUXUS ADM 7407 is delivered with with one or two flow measurement channels. Additionally, it can be equipped with various outputs and up to 4 process inputs. The input quantities (e.g. temperature or pressure) can be used by the flowmeter together with the measured flow for the calculation of further quantities: energy, mass flow, etc.